Better choices. Better coffee.
CupClarity
AEROPRESS · LOW DOSE

Felipe Meza’s small midday cup

A smaller dose with a clearly timed immersion and press.

2:00 suggested time6 guided stepsMethod: Felipe Meza
SOURCE & TIMING

Credited method. Independent guide.

Method by Felipe Meza. CupClarity independently wrote the instructions and drew the diagrams. No affiliation or endorsement is implied.

Source: stir 10 s, bloom 20 s, turn at 1:30, finish at 2:00. First pour 5 s and top-up 10 s are explicit interface estimates; stirring and bloom durations are sequential.

01 · MAKE IT YOURS

Your brew, your dose.

Start with the original settings below. Coffee dose is the weight of dry grounds; changing it scales the water automatically. Temperature is the water temperature when pouring. Step times do not scale automatically.

Jump to guided timer ↓

Record your grinder and setting for this recipe. Saved and shared with your version; this does not convert settings between grinders.

Brewing water140 g
Coffee : brewing water1 : 14.0
Grind starting pointMedium-fine
Customize the water plan

Enter water per step at the base dose of 10 g. Your selected dose scales these amounts automatically. Set a step to zero for waiting or pressing. The actual amount to pour appears beneath each field and in the guided steps.

Before starting the timer

  1. Fit a paper filter in the standard cap. Use a sturdy receiving cup and check usable chamber space.
  2. Inversion can spill hot liquid. Follow the brewer manual; use an upright recipe if unfamiliar. Seat the plunger firmly on a level surface before adding coffee.
  3. Prepare the filter cap before starting. Attach it securely before turning; support the chamber, plunger and receiving cup together.

Source: stir 10 s, bloom 20 s, turn at 1:30, finish at 2:00. First pour 5 s and top-up 10 s are explicit interface estimates; stirring and bloom durations are sequential. Editing values creates your variation of the credited method.

Water input is not finished drink yield. This recipe is limited to 140 g of water; check your brewer’s usable capacity.

Save, share & download

Saved on this device (0/10)

Your saved versions will appear here.

02 · FOLLOW THE BREW

Ready when you are

0:00/ 2:00

Step 1 of 6 · 5s remaining in this step

Keep this page open and your device volume on. Sounds may not play when the tab is suspended or the screen is locked. Timing catches up when you return.

In each pour, “Add” is the water for that step. “Scale target” is the cumulative water added since the start: tare before the first pour, not between pours. The timer advances automatically; pause if you need more time. Duration fields use seconds (60 s = 1 minute).

  1. 01

    First pour

    Add 50 g Scale target: 50 g

    Wet the grounds evenly.

  2. 02

    Stir

    Stir firmly but keep hot liquid inside the chamber.

  3. 03

    Bloom

    Let the wet grounds rest.

  4. 04

    Top up

    Add 90 g Scale target: 140 g

    Reach the total water target and secure the cap.

  5. 05

    Steep

    Keep the capped brewer stable.

  6. 06

    Turn & press

    With the filter cap secure, support both parts and carefully turn onto the cup. Press gently to finish the brew.

BEFORE YOU BREW

Make the experiment useful.

  • Start timing with the first pour unless preparation says otherwise. Keep the brewer attended; stop pressing if resistance is high.
  • Grinder clicks apply only to the named model. Adjust one variable at a time; flavour outcomes are not guaranteed.