Better choices. Better coffee.
CupClarity
AEROPRESS · LOW DOSE

Tobias Feldmann’s short immersion

A smaller dose with a clearly timed immersion and press.

2:00 suggested time5 guided stepsMethod: Tobias Feldmann
SOURCE & TIMING

Credited method. Independent guide.

Method by Tobias Feldmann. CupClarity independently wrote the instructions and drew the diagrams. No affiliation or endorsement is implied.

Source’s 1:30 is the press START. First pour uses the upper 10 s of its 5–10 s range; stir 10 s, top-up 15 s and press 30 s are estimates. Guide total: 2:00.

01 · MAKE IT YOURS

Your brew, your dose.

Start with the original settings below. Coffee dose is the weight of dry grounds; changing it scales the water automatically. Temperature is the water temperature when pouring. Step times do not scale automatically.

Jump to guided timer ↓

Record your grinder and setting for this recipe. Saved and shared with your version; this does not convert settings between grinders.

Brewing water220 g
Coffee : brewing water1 : 18.3
Grind starting pointMedium · Timemore C2 18 clicks
Customize the water plan

Enter water per step at the base dose of 12 g. Your selected dose scales these amounts automatically. Set a step to zero for waiting or pressing. The actual amount to pour appears beneath each field and in the guided steps.

Before starting the timer

  1. Fit a paper filter in the standard cap. Use a sturdy receiving cup and check usable chamber space.
  2. Inversion can spill hot liquid. Follow the brewer manual; use an upright recipe if unfamiliar. Seat the plunger firmly on a level surface before adding coffee.
  3. Prepare the filter cap before starting. Attach it securely before turning; support the chamber, plunger and receiving cup together.

Source’s 1:30 is the press START. First pour uses the upper 10 s of its 5–10 s range; stir 10 s, top-up 15 s and press 30 s are estimates. Guide total: 2:00. Editing values creates your variation of the credited method.

Water input is not finished drink yield. This recipe is limited to 220 g of water; check your brewer’s usable capacity.

Save, share & download

Saved on this device (0/10)

Your saved versions will appear here.

02 · FOLLOW THE BREW

Ready when you are

0:00/ 2:00

Step 1 of 5 · 10s remaining in this step

Keep this page open and your device volume on. Sounds may not play when the tab is suspended or the screen is locked. Timing catches up when you return.

In each pour, “Add” is the water for that step. “Scale target” is the cumulative water added since the start: tare before the first pour, not between pours. The timer advances automatically; pause if you need more time. Duration fields use seconds (60 s = 1 minute).

  1. 01

    First pour

    Add 30 g Scale target: 30 g

    Wet the grounds with the small initial addition.

  2. 02

    Stir

    Stir five to ten times without splashing.

  3. 03

    Top up

    Add 190 g Scale target: 220 g

    Reach the cumulative target.

  4. 04

    Steep

    Prepare and secure the rinsed filter cap before turning.

  5. 05

    Turn & press

    With the filter cap secure, support both parts and carefully turn onto the cup. Press gently into a sturdy cup.

BEFORE YOU BREW

Make the experiment useful.

  • Start timing with the first pour unless preparation says otherwise. Keep the brewer attended; stop pressing if resistance is high.
  • Grinder clicks apply only to the named model. Adjust one variable at a time; flavour outcomes are not guaranteed.